User Manual Q&AAnswer
Feb 06, 2025 - 10:03 PM
To assemble the PowerPac PPFS30 16 Inch Electric Stand Fan, follow these steps:
1. Unpack all parts from the package and place them on the floor.
2. Unscrew the L- xxxx and Washer from the Outer Pole and set them aside temporarily.
3. Holding the Base (with the Base Cover attached on top), insert the Outer Pole containing the Extension Pole onto the Base and tighten it with the L- xxxx , with the Washer placed in between the Base and the L- xxxx .
4. Pull the Extension Pole out of the Outer Pole to your desired height and tighten using the Height Adjustment Ring between the Extension Pole and the Outer Pole.
5. Insert the Main Body onto the top of the Extension Pole. Secure it by tightening the Main Body xxxx .
6. Assemble the Grille and the blade on the Fan Head as follows:
a. Holding the Space Pin, unscrew the Blade Cap by turning clockwise and the Guard Mounting Nut by turning anti-clockwise.
b. Insert the Back Grille through the Motor Shaft and secure it to the Fan Head by tightening the Guard Mounting Nut clockwise.
c. Insert the Fan Blade through the Motor Shaft. Wiggle the Wedge Groove at the back of the Fan Blade onto the Space Pin of the Motor Shaft.
d. Secure the Fan Blade to the Motor Shaft by tightening the Blade Cap anti-clockwise.
e. Ensuring the logo at the front of the Front Grille is positioned properly, attach the Front Grille to the Back Grille and secure them by turning the xxxx of the Grille Ring Clip at the bottom of the Grille Ring.
Please refer to the user manual for visual illustrations and additional safety precautions.
Add New Comment