User Manual Q&AAnswer
Feb 06, 2025 - 10:00 PM
To change the operating mode on the BLAUPUNKT FHD401 Fan Heater, press the M button on the control panel. Each press of the M button will cycle through the different operation modes. The modes are indicated by the number of dots displayed on the control panel:
- 1 dot: cold airflow (only the fan is running)
- 2 dots: warm air (1000 W)
- 3 dots: hot blast (2000 W)
To set the desired temperature, press the + and - buttons on the control panel. The temperature can be set between 16-37 degrees Celsius.
Please note that the heater also has a delayed timer function. To set the timer, hold down the M button for a long time (5 seconds), then use the + and - buttons to set the time after which the device should switch off (maximum 9 hours).
For more detailed instructions and safety precautions, please refer to the BLAUPUNKT FHD401 Fan Heater Owner's Manual.
Add New Comment