How do I install the SCREWFIX 1705BTU Hex Radiator? (1705BTU Hex Radiator User Manual)

Answer

manuals.plus

Feb 06, 2025 - 09:59 PM


To install the , please follow the steps outlined in the user manual provided with the product. Here is a general guide on how to install the radiator:

1. Tools Required:
   - Drill
   - Screwdriver
   - Spirit level
   - Pipe cutter
   - Adjustable spanner
   - PTFE tape
   - Radiator valves (not included)

2. Dimensions:
   - Before installation, ensure you have measured the available space and confirmed that the radiator will fit properly.

3. Installation Steps:
   a. Turn off the central heating system and drain the water from the existing radiator (if applicable).
   b. Remove the old radiator by unscrewing the valves and brackets.
   c. Install the new radiator brackets onto the wall, ensuring they are level and securely fixed.
   d. Connect the radiator valves to the pipework using PTFE tape to create a watertight seal.
   e. Hang the radiator onto the brackets, making sure it is level.
   f. Tighten the radiator valves onto the radiator using an adjustable spanner.
   g. Turn on the central heating system and check for any leaks.
   h. Bleed the radiator to remove any trapped air.
   i. Adjust the thermostatic valve to your desired temperature.

Please note that this is a general guide, and it is essential to refer to the specific instructions provided in the user manual for the SCREWFIX 1705BTU Hex Radiator for accurate installation steps and any additional requirements or precautions.