User Manual Q&AAnswer
Feb 06, 2025 - 09:52 PM
To install the Logitech 945-000012 Flight Switch Panel, follow these steps:
1. Fix the Switch Panel to your desk using the provided velcro strips. Alternatively, if you have a Logitech G Flight Yoke System, you can mount the Switch Panel on top of the Yoke unit using the screws provided. To do this, remove the Switch Panel from the mounting bracket, xxxx the bracket to the top of the Yoke System, and then re-attach the Switch Panel to the front of the bracket.
2. Plug the Switch Panel's USB cable into one of your PC's free USB ports or into the Logitech G Flight Yoke USB hub.
3. For Windows 10, Windows 8.1, and Windows 7, you need to install the appropriate drivers. Visit logitech.com/support/switch-panel to download the latest drivers and software for your operating system. Follow the onscreen instructions to complete the installation. When prompted, insert the USB cable into one of your computer's USB ports.
If you encounter any issues with the Panel not being recognized by Flight Simulator X (FSX), try the following troubleshooting steps:
1. Make sure you have installed the appropriate plug-in for FSX. When you run FSX after installing the plug-in, it should prompt you to load the Logitech G Panel(s) Plug-in for FSX. Click "Yes" on this screen.
2. If you see a Windows security warning asking if you want to run LogiFlightSimX.exe, click "Yes" to proceed.
3. FSX may prompt you to make LogiFlightSimX.exe a trusted piece of software. Click "Yes" to allow it.
4. If the Panel buttons and controls are not automatically configured to control their functions in FSX, try unplugging the USB cable and plugging it back in.
If you need further assistance with other flight simulators or have any other questions, you can visit the support page at logitech.com/support/switch-panel. Additionally, you can contact Logitech's technical support through their online support portal at support.logitech.com.
Add New Comment