User Manual Q&AAnswer
Feb 06, 2025 - 09:42 PM
To install the HOLOSUN 503CU Micro Sight on your firearm, follow these steps:
1. Ensure that the firearm is completely unloaded and safe before installation.
2. If your firearm has a Picatinny rail, insert the Allen wrench into the clamp xxxx hole and rotate to loosen the convex set.
3. Slide the sight into the weapon rail to the desired position.
4. Fasten the clamp xxxx to secure the sight in place.
5. If your firearm does not have a Picatinny rail or has a different type of rail, please make a note in your purchase order for additional instructions.
For more detailed instructions and illustrations, please refer to Figure 3 in the user manual.
Note: It is important to read the user manual carefully and follow all safety precautions before installing the sight on your firearm.
Add New Comment