User Manual Q&AAnswer
Feb 06, 2025 - 09:39 PM
To properly install the BLAUPUNKT GTA 11200 Power Amplifier, follow these steps:
1. Disconnect the negative terminal of the battery before starting the installation process.
2. Choose a dry and well-ventilated location to install the amplifier. Avoid installing it in overly exposed locations such as the rear shelf or rear seat.
3. Ensure that the installation location has stable ground support and suitable xxxx holes.
4. Consult an authorized Blaupunkt dealer for installation or repair if needed.
5. Use a 2.5mm2 cross-section cable if the positive and negative cables are too long.
6. Do not replace the integrated fuse with a higher current fuse if it is damaged.
For more detailed instructions and safety precautions, please refer to the BLAUPUNKT GTA 11200 Power Amplifier Instruction Manual.
Add New Comment