User Manual Q&AAnswer
Feb 06, 2025 - 09:29 PM
To install the FISHER PAYKEL RS36W Contemporary Square Handle Kit for Integrated Refrigerator Freezer, please follow the steps below:
1. Ensure that you have the necessary tools for installation, including a screwdriver.
2. Start by removing any existing handles or trim from the refrigerator freezer door.
3. Take the square handle kit and align it with the pre-drilled holes on the door.
4. Insert the screws provided with the handle kit into the holes and tighten them securely using a screwdriver.
5. Repeat the process for the other side of the door if you have a pair of handles.
6. Once both handles are securely attached, check for any loose screws and tighten them if necessary.
7. If you are using a Fisher and Paykel stainless steel door panel or cabinetry panel, ensure that it is properly aligned with the handle kit and secure it according to the manufacturer's instructions.
Please note that these instructions are a general guideline, and it is always recommended to refer to the specific user guide or installation manual provided with the product for detailed instructions and any additional steps that may be required.
Add New Comment