User Manual Q&AAnswer
Feb 06, 2025 - 09:00 PM
To install the Fisher & Paykel AHS-ASBI-A Contemporary Round Door Handle for French Door Refrigerator Freezer, please follow the steps below:
1. Ensure that you have all the necessary components included in the package. The handle kit should consist of three pieces.
2. Before installation, make sure to clean the surface of the refrigerator door or panel where the handle will be attached. Use a mild detergent and water to remove any dirt or residue.
3. Position the handle on the desired location of the refrigerator door or panel. The handle should align with the pre-drilled holes or mounting points.
4. Insert the screws provided into the pre-drilled holes on the handle and tighten them using a screwdriver. Make sure the handle is securely attached to the door or panel.
5. Repeat the process for the remaining pieces of the handle, if applicable.
6. Once all the pieces are securely attached, double-check the alignment and tightness of the handle. Ensure that it is straight and properly aligned with the door or panel.
7. After installation, clean the handle with a soft cloth and mild detergent to maintain its appearance.
Please note that these instructions are a general guide, and it is always recommended to refer to the specific user guide or installation manual provided with the product for detailed instructions tailored to your model.
Add New Comment