Answer

Feb 06, 2025 - 08:42 PM
Installation and wiring instructions for the EGLO 75685 ADEJE LED Ceiling Fixtures are as follows:
1. Start by turning off the power supply to the area where you will be installing the fixture.
2. Carefully unpack the fixture and ensure that all parts are included and undamaged.
3. Determine the location where you want to install the fixture. Ensure that it is suitable for the weight and size of the fixture.
4. Attach the mounting bracket to the electrical box in the ceiling using the provided screws. Make sure it is securely fastened.
5. Connect the wires from the fixture to the corresponding wires in the electrical box. The fixture should have a black (hot/live), white (neutral), and green or bare copper (ground) wire. Match these wires with the corresponding wires in the electrical box. Use wire connectors or wire nuts to secure the connections.
6. Once the wires are securely connected, carefully tuck them into the electrical box and attach the fixture to the mounting bracket using the provided screws.
7. Double-check all connections to ensure they are secure and properly insulated.
8. Turn the power supply back on and test the fixture by pressing the ON/OFF button. The light should illuminate if the installation and wiring were done correctly.
Please note that these instructions are a general guideline. It is always recommended to refer to the specific instructions provided with the EGLO 75685 ADEJE LED Ceiling Fixtures for detailed and accurate installation steps.
Add New Comment