User Manual Q&AAnswer
Feb 06, 2025 - 08:37 PM
To set the timer on the MYLEK MYOD2000 Overdoor PTC Heater, follow these steps:
1. Plug in the heater and switch it on by pressing the red switch.
2. Press the button once to enter fan mode. The display will show "--".
3. Press the button a second time to enter low heating mode (1000W). The display will show "1000W".
4. Press the button a third time to enter high heating mode (2000W). The display will show "2000W".
5. Press the button a fourth time to enter swing mode. The display will show ":".
6. Press the button a fifth time to return to standby mode. The display will show "B" until the cool down sequence (30 seconds) has finished and the unit enters standby mode.
7. To set the timer, press the button. Each press of the button increases the timer by one hour. After setting the timer, the display will show the current set time for 5 seconds, then resume to the previous display.
Note: The timer can be set from 00 to 12 hours. The heater will automatically turn off after the set time has elapsed.
Please refer to the instruction manual for more details and illustrations on how to operate the MYLEK MYOD2000 Overdoor PTC Heater.
Add New Comment