User Manual Q&AAnswer
Feb 06, 2025 - 08:24 PM
To install hard drives and expansion cards in the SILVERSTONE RM44 Workstation Case, please follow these steps:
1. Remove the 4 screws from the expansion card retainer.
2. Shift the position of the expansion card retainer to avoid interference with the expansion card connectors and ensure the length of the PSU does not interfere.
3. Install 2 x 3.5" HDD on the expansion card retainer.
4. Install 3 x 2.5" SSD on the expansion card retainer.
5. Install 2.5" drives on the 2.5" trays.
Note: When installing expansion cards, take into account the height limitation with the expansion card clip buckle installed, removed, or the expansion card retainer removed. Adjust the position of the expansion card retainer according to the required height of the interface card, then tighten the xxxx .
For more detailed instructions and illustrations, please refer to the SILVERSTONE RM44 Workstation Case User Manual.
Add New Comment