How do I set up my NETGEAR WNDR3400 N600 Dual Band Wi-Fi Router? (Netgear N600 Dual Band Wi-Fi router User Manual)

Answer

manuals.plus

Feb 06, 2025 - 09:58 AM


To set up your NETGEAR WNDR3400 N600 Dual Band Wi-Fi Router, you can follow these steps:

1. Connect your modem: Use an Ethernet cable to connect your modem to the Internet port (yellow port) on the router.

2. Power on the devices: Plug in the power adapter to the router and connect it to a power source. Wait for the router to power on.

3. Connect to the router: Use a computer or mobile device to connect to the Wi-Fi network named "NETGEAR" or "NETGEAR-5G" (for the 5 GHz band). The default Wi-Fi password can be found on the product label on the bottom of the router.

4. Configure the router: Open a web browser on your connected device and enter "www.routerlogin.net" or "www.routerlogin.com" in the address bar. You will be prompted to enter the default username and password, which are both "admin" (without quotes).

5. Follow the setup wizard: The setup wizard will guide you through the initial configuration process. You may need to select your country, set up a wireless network name (SSID), and choose a password for your Wi-Fi network.

6. Complete the setup: Once you have completed the setup wizard, the router will apply the settings and restart. You may need to reconnect your devices to the newly configured Wi-Fi network using the new network name and password.

For more detailed instructions and troubleshooting information, please refer to the NETGEAR WNDR3400 N600 Dual Band Wi-Fi Router User Manual provided in the link above (page 10 onwards).