User Manual Q&AAnswer
Feb 06, 2025 - 09:36 AM
To pair the remote control with the collar, follow these steps:
1. Make sure the collar is powered off. Hold the ON/OFF BUTTON for 5 seconds until the STATUS LED on the collar flashes in green.
2. Toggle the CHANNEL SWITCH on the remote control to select channel I.
3. Press the VIBRATE BUTTON and the BEEP BUTTON simultaneously for 3 seconds until the STATUS LED on the remote flashes in green.
4. If the pairing is successful, the STATUS LED on the collar will flash in green twice, emit a beep sound, and vibrate once.
5. If no pairing is performed within 20 seconds, the STATUS LED on the collar will turn off, and the collar will enter the standby mode.
Note: The remote control and collar provided are already paired by the factory setting. You only need to perform the pairing process if the collar loses its link with the remote control or if you want to pair a new collar. It is recommended to pair one collar at a time, and it is not recommended to pair multiple collars in one channel.
For more detailed information, please refer to page #11 of the instruction manual.
Add New Comment