User Manual Q&AAnswer
Feb 06, 2025 - 08:56 AM
To switch between devices using the GANA Intelligent 3-Port 4K Switch HDMI Switcher, you have two options: manual switching and remote control switching.
1. Manual Switching: On the HDMI switcher, there is a built-in button that allows you to manually switch between the three HDMI input sources. Simply press the SELECT button to cycle through the available input sources until you reach the desired one.
2. Remote Control Switching: The HDMI switcher comes with an infrared remote control. To switch between devices using the remote control, make sure to insert the batteries and turn on the power by pressing the "ON/OFF" button. Then, use the remote control to select the desired input source by pressing the corresponding number button (1, 2, or 3) for the desired device.
Please note that for both manual and remote control switching, you need to ensure that the signal line is properly connected to transmit a signal. Without a signal, the remote switch will not work.
For more detailed instructions, please refer to the instruction guide provided with the GANA Intelligent 3-Port 4K Switch HDMI Switcher.
Add New Comment