User Manual Q&AAnswer
Feb 06, 2025 - 08:11 AM
To adjust the sensitivity level on the PetYeah B694 Dog Bark Collar, please follow these steps:
1. Make sure the collar is turned off.
2. Press and hold the Power/Set button for 3 seconds until the red/green indicator light flashes. This indicates that the device is in the working mode selection status.
3. Briefly press the Power/Set button to cycle through the working modes (beep, vibration, and shock).
4. After selecting the desired working mode, wait for 5 seconds until the mode indicator light stops blinking. This indicates that the working mode has been chosen.
Please refer to the user manual for more detailed instructions and information on the different working modes and intensity levels available for each mode.
Note: It is important to choose the appropriate sensitivity level that suits your dog's behavior and needs. Start with the lowest level and gradually increase if necessary, while closely monitoring your dog's response to the collar. Always ensure that the collar is not causing any discomfort or distress to your dog.
Add New Comment