User Manual Q&AAnswer
Feb 06, 2025 - 07:22 AM
To connect the Logitech MK335 Wireless Keyboard and Mouse Combo to your computer, follow these steps:
1. Insert the USB Nano receiver into an available USB port on your computer. The receiver is located in the battery compartment of the mouse. Press down and slide the battery door to release it, and you will find the receiver inside.
2. Turn on the keyboard and mouse by sliding the On/Off switch located on the bottom of each device.
3. Wait for a few seconds for the devices to establish a connection with the USB receiver. The LED on the receiver will blink to indicate that it is searching for a connection.
4. Once the connection is established, the LED on the receiver will stop blinking, and the keyboard and mouse should be ready to use.
Note: The Logitech MK335 Wireless Keyboard and Mouse Combo uses Logitech's Unifying technology, which allows you to connect up to six compatible Logitech keyboards and mice to the same receiver using a single USB port. If you have other compatible Logitech devices, you can add them to the same receiver by following the instructions provided on the Logitech website: www.logitech.com/support/unifying.
Add New Comment