User Manual Q&AAnswer
Feb 06, 2025 - 06:55 AM
To program your Sideclick Universal Remote Attachment, follow these steps:
1. Insert the included 2 AAA Batteries into the Sideclick Remote.
2. Select and attach the Adapter Clip that corresponds to your Amazon Fire TV remote.
3. Snap your Amazon Fire TV remote into the Adapter Clip.
4. On the Sideclick remote, hold down the buttons simultaneously until the LED lights solid.
5. Position your Sideclick remote and the device remote you are learning from on a table, head to head, approximately 1 inch apart.
6. Press and release the Sideclick button you wish to program. The LED will start blinking.
7. Press and release the button you want it to learn from on your device remote.
8. The LED will blink 3 times indicating a successful learn, then will return to solid indicating you are ready to program other buttons.
9. If the LED does not return to solid, a problem in programming has occurred. Exit programming mode via step 10 and try again.
10. While the LED is on solid, repeat steps 6 and 7 for each button you would like to program.
11. To exit programming mode, press the simultaneously and the LED will turn off. You can also wait approximately 10 seconds and it will exit programming mode automatically.
Your Sideclick Universal Remote Attachment is now programmed and ready to use. For additional information and troubleshooting, you can visit the Sideclick Remotes website at www.sideclickremotes.com.
Add New Comment