Answer

Feb 06, 2025 - 06:48 AM
According to the Nuwave Brio 15.5-Qt Air Fryer Smart Oven Owner's Manual, here are the steps to preheat the appliance:
1. Plug in the air fryer smart oven and ensure it is placed on a stable and heat-resistant surface.
2. Open the oven door and remove any accessories or racks from the cooking chamber.
3. Close the oven door and press the "Power" button to turn on the appliance.
4. Use the "Temperature" button to select the desired preheat temperature. The temperature range is 100°F to 400°F (37°C to 204°C).
5. Press the "Start/Pause" button to begin the preheating process. The display will show the current temperature and the oven will start heating up.
6. The preheating time will vary depending on the selected temperature. The display will show the current temperature as it increases.
7. Once the oven reaches the set preheat temperature, it will beep to indicate that it is ready for cooking.
8. Open the oven door and place the desired food inside the cooking chamber.
9. Close the oven door and adjust the cooking time and temperature as needed for the specific recipe.
10. Press the "Start/Pause" button to start the cooking process.
Please note that the preheating process is important to ensure even and consistent cooking results. It is recommended to preheat the air fryer smart oven before every use, unless otherwise specified in a recipe.
For more detailed instructions and safety precautions, please refer to the Nuwave Brio 15.5-Qt Air Fryer Smart Oven Owner's Manual provided in the link above.
Add New Comment