User Manual Q&AAnswer
Feb 06, 2025 - 06:32 AM
To install the , follow these steps:
1. Make sure your computer is powered off and unplugged from the power source.
2. Open your computer case and locate an available PCIe slot. The Ubit AX210 WiFi card uses a PCIe x1 interface, but it is also compatible with x4, x8, and x16 slots.
3. Remove the metal plate covering the PCIe slot by unscrewing it or pushing it out.
4. Align the Ubit AX210 WiFi card with the PCIe slot, making sure the gold contacts on the card are facing down and the antenna connectors are facing towards the back of the computer.
5. Gently insert the Ubit AX210 WiFi card into the PCIe slot until it is fully seated.
6. Secure the card in place by screwing it into the computer case using the xxxx provided with the card.
7. Connect the antennas to the antenna connectors on the Ubit AX210 WiFi card.
8. Close the computer case and reconnect the power source.
9. Power on your computer and wait for the operating system to detect the new hardware.
10. Install the driver for the Ubit AX210 WiFi card. The driver should be included in the package. If not, you can download it from the Ubit website or use the driver installation disc if provided.
11. Follow the on-screen instructions to complete the driver installation.
12. Once the driver installation is complete, you should be able to use the Ubit AX210 WiFi card to connect to wireless networks.
Please refer to the Ubit AX210 WiFi 6E PCIe Wireless WiFi Card Instruction Manual for more detailed installation instructions and troubleshooting tips.
Add New Comment