User Manual Q&AAnswer
Feb 06, 2025 - 05:58 AM
To install the ULTRALUX Modern LED Atom Ceiling Fixture, please follow the steps outlined in the installation guide provided with the product. Here is a summary of the installation process:
1. Before starting the installation, make sure to shut off the main electrical supply from the main fuse box or circuit breaker.
2. Remove the contents from the box and ensure that no parts are missing. Refer to the illustration steps included in the instruction manual.
3. Pull the supply wires (white and black) and the supply ground wire out from the junction box.
4. Remove the mounting bracket from inside the canopy and place it over the junction box, aligning the slots of the bracket with the xxxx holes in the junction box. Secure the mounting bracket to the junction box using the provided mounting screws.
5. Make the following wire connections using wire nuts:
- Connect the white (neutral/common) supply wire to the white fixture wire.
- Connect the black (line) supply wire to the black fixture wire.
- Connect the supply ground wire to the fixture ground wire.
6. If necessary, wrap all wire connections in electrical tape to ensure a secure connection.
7. Carefully tuck all wiring back into the junction box.
8. Align the xxxx holes at the top of the canopy with the holes in the mounting bracket. Attach the canopy to the mounting bracket by feeding the fixture screws through the holes of the canopy and into the holes of the bracket. Tighten the fixture screws securely.
9. Restore power at the fuse box or circuit breaker. Check the operation of the integrated LED fixture and adjust the LED lights in the desired pattern.
10. The installation is now complete.
Please note that this is a general overview of the installation process. For more detailed instructions and illustrations, refer to the ULTRALUX Modern LED Atom Ceiling Fixture Installation Guide provided with the product.
Add New Comment