User Manual Q&AAnswer
Feb 06, 2025 - 05:54 AM
To assemble the Silvercrest Mincer SFW 350 E5 Meat Mincer, follow these steps:
1. Unfold the fold-out side of the instruction manual for step-by-step illustrations.
2. Coat all metal parts with cooking oil.
3. Place the transport xxxx in the meat grinder casing and place the spring onto the transport xxxx .
4. Fit the cross blade onto the transport xxxx , ensuring that the sharp side points away from the spring. Make sure the square opening in the cross blade is correctly placed on the square axle.
5. Select the appropriate cutting disc or sausage disc and place it into the meat grinder casing, ensuring that the fixings on the disc are located in the openings in the casing.
6. xxxx the ring clamp back on hand-tight.
7. Connect the meat grinder casing to the motor unit by fitting it in and aligning the symbols on the casing and motor unit. The locking button should push in when the casing is pressed in gently and the feed tube should be turned to the middle position.
8. Place the feeding tray on top of the feeding funnel.
For more detailed instructions and illustrations, refer to the "Assembly/Disassembly" section of the instruction manual.
Note: It is important to familiarize yourself with all safety instructions and warnings before assembling and using the meat mincer.
Add New Comment