How do I adjust the power and temperature settings on the BLAUPUNKT HCO301 Convection Heater? (BLAUPUNKT HCO301 Convection Heater Owner's Manual)

Answer

manuals.plus

Feb 06, 2025 - 05:46 AM


To adjust the power and temperature settings on the BLAUPUNKT HCO301 Convection Heater, follow these steps:

1. Ensure that the switches on the control panel are in the off position and the thermostat  xxxx  is turned to the minimum position.
2. Connect the heater to a power source.
3. To select the desired power level, use the switches on the control panel:
   - For 750 W power, turn on the first switch and turn off the second switch.
   - For 1250 W power, turn on the second switch and turn off the first switch.
   - For 2000 W power, turn on both switches.
4. Turn the thermostat  xxxx  clockwise to the maximum position.
5. As the room temperature rises, slowly turn the thermostat  xxxx  in the opposite direction (clockwise) until the indicator light goes out. This will set the desired temperature.
6. To increase the desired temperature, turn the thermostat  xxxx  clockwise. To decrease the temperature, turn the  xxxx  to the left.
7. The heater will automatically turn on and off to maintain the room temperature at the desired level.
8. If you want to accelerate the heat distribution, you can switch on the fan.
9. To stop the operation of the heater and switch it off, set the switches on the control panel to the "0" position and turn the thermostat  xxxx  to the minimum position. Finally, disconnect the heater from the power source.

Please refer to the owner's manual for more detailed instructions and safety precautions.