How do I install the SCHUBERTH Prime Box Pico? (SCHUBERTH Prime Box Pico Installation Guide)

Answer

manuals.plus

Feb 06, 2025 - 05:43 AM

To install the SCHUBERTH Prime Box Pico, please follow these steps:

1. Ensure that you have read and understood the operating instructions provided by SCHUBERTH. You can download the operating instructions from their website at www.schubert-system-elektronik.de/de/...

2. Take note of the installation conditions and mounting options. The device is designed for vertical installation in control cabinets. It should not be installed and operated upside down. Alternatively, you can install it vertically or horizontally at the rear of the housing using the two mounting plates. Pay attention to the correct orientation during installation, with the antennas on top for vertical installation or the heat sink on top for horizontal installation.

3. Make sure there is a minimum distance of 50 mm inside the control cabinet for convection.

4. Connect the device according to the grounding concept provided in the operating instructions. It is important to observe proper grounding for safe operation.

5. If you have any further questions or need assistance, you can contact Schubert System Elektronik GmbH at the following contact details:
- Address: take-off Gewerbepark 36, D-78579 Neuhausen ob Eck
- Phone: +49 7467 9497 0
- Email: info@schubert-system-elektronik.de

Please note that the installation and commissioning of the SCHUBERTH Prime Box Pico should be done by qualified personnel only. It is important to ensure compliance with safety regulations and the proper operation and maintenance of the product for correct and safe usage.