Answer

Feb 06, 2025 - 05:35 AM
To pair the HOFTRONIC SR-1009SAC LED Wall Dimmer with a remote control, follow these steps:
1. Ensure that the wiring is done correctly according to the provided connection diagram.
2. Locate the learning key on the receiver. It is a button that needs to be pressed during the pairing process.
3. Refer to the user manual of your remote control to find the specific instructions for pairing with a receiver. Typically, you will need to press a specific combination of buttons on the remote control.
4. While following the instructions from your remote control's user manual, press and release the learning key on the receiver. The LED light on the receiver will flash to indicate that it is ready for pairing.
5. Once the receiver and remote control are successfully paired, the LED light on the receiver will flash again to indicate the successful learning.
Note: If you want to reset the receiver to its factory defaults, press and hold the learning key on the receiver for over 5 seconds until the LED light flashes. This will delete the learned ID and reset the receiver.
For further information or updates, please consult your supplier or refer to the user manual.
Add New Comment