User Manual Q&AAnswer
Feb 06, 2025 - 05:33 AM
To connect the Thundercomm TurboX C410/610 Open Kit to a computer for debugging, you will need to use the UART debug connector (connector 18) on the board. Here are the steps to follow:
1. Take out the Thundercomm TurboX C410/610 Open Kit board carefully from the package.
2. Connect the board to a computer via the UART debug connector (connector 18).
- Note: The UART debug connector is used as a debug interface and can be connected if the debug function is needed.
Once connected, you can use the appropriate debugging software or tools to communicate with the board and perform debugging operations.
Please refer to the Thundercomm TurboX C410/610 Open Kit User Guide for more detailed instructions and information on debugging with the board.
Add New Comment