User Manual Q&AAnswer
Feb 06, 2025 - 05:31 AM
To connect the CREATIVE Pebble V2 speakers to your device, follow these steps:
1. Check if your device has a USB-C port or a USB-A port. The speakers can be connected to either type of port.
2. If your device has a USB-C port, use the provided USB-C cable to connect one end to the USB-C port on the back of the right speaker, and the other end to the USB-C port on your device.
3. If your device has a USB-A port, you will need a USB-A to USB-C adapter (not included). Connect the USB-C cable to the USB-C port on the back of the right speaker, and connect the USB-A end of the cable to the USB-A to USB-C adapter. Then, plug the USB-A end of the adapter into the USB-A port on your device.
4. Once the speakers are connected to your device, turn on the speakers by rotating the volume xxxx clockwise.
5. Adjust the volume by rotating the volume xxxx clockwise or counterclockwise.
6. If you want to increase the power output of the speakers, set the Gain switch on the back of the right speaker to "High." This will allow the speakers to deliver up to 8W RMS power when connected to a 10W USB-C port or a suitable power adapter.
Please note that the USB-C power adapter or USB-A power adapter is not included with the speakers. You will need to use your own compatible power adapter if you wish to use the speakers at their maximum power output.
Add New Comment