User Manual Q&AAnswer
Feb 06, 2025 - 05:24 AM
To connect the TEKBOX TBHPF1-150kHz High Pass Filter to your spectrum analyzer, follow these steps:
1. Identify the connectors: The TEKBOX TBHPF1-150kHz High Pass Filter has N-Male and N-Female connectors.
2. Locate the RF input connector on your spectrum analyzer: The RF input connector on your spectrum analyzer may vary depending on the model. It is typically labeled as "RF IN" or "INPUT" and may have an N-Type connector.
3. Connect the N-Male connector of the High Pass Filter to the RF input connector of your spectrum analyzer. Ensure a secure connection by tightening the connectors.
4. If you need to extend the cable length between the High Pass Filter and the spectrum analyzer, you can use an N-Type male-to-female coaxial cable.
5. Once the High Pass Filter is connected, you can use your spectrum analyzer as usual, and the filter will provide high pass filtering with a 3dB bandwidth of 150 kHz to 3 GHz.
Please refer to the TEKBOX TBHPF1-150kHz High Pass Filter User Guide for more detailed information and specifications.
Add New Comment