User Manual Q&AAnswer
Feb 06, 2025 - 05:23 AM
To use the MagicPro 300ml Portable Garment Steamer for Clothes, follow these steps:
1. Fill the water tank: Make sure the unit is off and unplugged. Remove the water tank and fill it with water up to the maximum fill line (300ml capacity).
2. Attach the desired accessory: With the water tank filled, attach the desired accessory to use on your garment. Refer to the manual for instructions on attaching and removing accessories.
3. Prepare the garment: Hang your garment to be steamed on a clean, rust-free hanger.
4. Plug in the steamer: Plug the unit into a standard electrical outlet. Make sure the cord is arranged so that it cannot be pulled or tripped over.
5. Turn on the steamer: Slide the switch to Low or High. The red power indicator light will illuminate and cycle on and off as the temperature is maintained. In approximately 45 seconds, the green ready light will also illuminate. Note that the green light may cycle off and the pump will stop if the temperature is too low to generate steam.
6. Start steaming: Hold the steamer by the handle in a vertical position with the head pointing toward the fabric and away from you. With your free hand, pull the fabric tight and press the trigger switch as you move the steamer over the fabric. If using the Creaser accessory, press the lever to open it and run the edge of your fabric through it to create an iron-like crease.
7. Safety precautions: Always point the steamer exit away from yourself, other persons, pets, plants, and walls. Never steam clothes while they are being worn. Be cautious of hot metal parts, hot water, or steam, as they can cause burns.
For more detailed instructions and safety precautions, please refer to the MagicPro 300ml Portable Garment Steamer for Clothes User Manual.
Add New Comment