User Manual Q&AAnswer
Feb 06, 2025 - 05:22 AM
To install the Lucide Skanska 3000K Desk Lamp, please follow these steps:
1. Before starting the installation, make sure to read and understand the safety instructions provided in the manual.
2. Ensure that the power is isolated before beginning the installation.
3. The installation should be done by a qualified electrician to ensure proper and safe installation.
4. Pay attention to the location where the lamp will be installed. The Skanska 3000K Desk Lamp is suitable for indoor use only, except for bathrooms (unless a higher IP degree permits bathroom use).
5. Do not install the lamp in humid places or in contact with water or any liquids.
6. Respect the minimal distance indicated on the lamp to inflammable products.
7. During installation, make sure that the cables are not squeezed or damaged by sharp edges.
8. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician.
9. Allow the lamp and bulbs to cool down before touching them, as they can get very hot during operation.
10. Always use the correct bulb type and wattage as indicated on the product.
For further information or specific details about the installation process, please refer to the Lucide Skanska 3000K Desk Lamp Installation Guide provided with the product.
Add New Comment