How do I install the NOVUS NVIP-4VE-6502M-F-II IP Motor Zoom Camera? (NOVUS NVIP-4VE-6502M-F-II IP Motor Zoom Camera User Guide)

Answer

manuals.plus

Feb 06, 2025 - 05:07 AM

To install the NOVUS NVIP-4VE-6502M-F-II IP Motor Zoom Camera, please follow these steps:

1. Mounting the Camera:
- Unscrew the counter xxxx and remove the camera cover.
- Put the bracket on the wall in the desired mounting place, and mark the drilling holes for screws and wires.
- Drill the holes for screws, wires, and the camera base.
- Mount the camera base using the supplied plugs and screws.
- If necessary, unscrew the camera service panel, insert a microSD card into the socket, and xxxx the camera service panel.
- Connect the camera wires, put the camera on the base, attach the cover, and tighten the counter xxxx .
- Adjust the camera position and tighten the counter xxxx to secure it.

2. Connecting to Power:
- Connect the camera to a network switch with PoE support using an Ethernet cable, or use an external power supply and connect it to the camera's power supply connector.
- Ensure that the power source meets the specifications mentioned in the user manual.

3. Network Configuration:
- Set your PC's IP address to be in the same network subnet as the camera's default IP address (192.168.1.200).
- Open a web browser and enter the camera's IP address in the address bar.
- Read and accept the privacy statement.
- Set a password for the web account.
- Enter the user name "root" and the newly set password to log in to the camera's web panel.

4. Live Video Display:
- In the camera menu, click on "Live" to open the live video.
- Use the image settings buttons to adjust the picture display mode.
- Use the function buttons to change the displayed stream and fluency.
- You can also access other camera settings and features through the configuration menu.

Please refer to the user manual for more detailed instructions and information on configuring and using the NOVUS NVIP-4VE-6502M-F-II IP Motor Zoom Camera.