User Manual Q&AAnswer
Feb 06, 2025 - 04:48 AM
To change the operating condition of the SANY SPC250 truck crane, you need to adjust the boom length and the span of the outriggers. The operating condition determines the working range and the lifting capacity of the crane. Here are the steps to change the operating condition:
1. Determine the desired boom length: The boom length can be adjusted from a minimum of 10.22m to a maximum of 31.5m. Choose the appropriate boom length based on your lifting requirements.
2. Adjust the span of the outriggers: The span of the outriggers should be set at 5.45m x 6.2m. This provides stability and support for the crane during operation.
3. Set the rotation angle: The crane can rotate 240° or 360° depending on the operating condition. Make sure to set the rotation angle accordingly.
4. Check the counterweight: The counterweight should be set at 1.6T for the specified operating conditions.
By adjusting these parameters, you can change the operating condition of the SANY SPC250 truck crane to meet your specific lifting needs. Please refer to the "Operation Condition" section in the owner's manual for more detailed instructions and safety guidelines.
Add New Comment