User Manual Q&AAnswer
Feb 06, 2025 - 04:37 AM
Installation and connection of the felicity solar MSD120-400W Mono Half Cut Single or Double Glass Module can be done following these steps:
1. Mounting: Choose a suitable location for the solar module installation, ensuring it receives maximum sunlight exposure throughout the day. The module can be mounted on a rooftop, ground, or any other suitable structure. Use appropriate mounting brackets or rails to secure the module in place.
2. Wiring: Connect the solar module to the electrical system using the provided output cable with MC4 connectors. Ensure that the cable is properly connected to the junction box on the module. The junction box has an IP67 rating, which means it is protected against dust and water ingress. Make sure the connections are tight and secure.
3. Electrical System Integration: Connect the other end of the output cable to the appropriate electrical components, such as inverters, charge controllers, or batteries, depending on your system setup. Follow the electrical system manufacturer's instructions for proper integration.
4. Grounding: It is essential to properly ground the solar module for safety reasons. Connect the grounding wire from the module's junction box to the grounding system of your electrical installation. Consult a qualified electrician or follow local electrical codes and regulations for proper grounding procedures.
5. Maintenance: Regularly inspect the solar module for any physical damage or debris that may affect its performance. Clean the surface of the module with a soft cloth and mild detergent if necessary. Avoid using abrasive materials or harsh chemicals that may scratch or damage the glass surface.
For more detailed instructions and safety guidelines, refer to the felicity solar MSD120-400W Mono Half Cut Single or Double Glass Module instructions manual provided by the manufacturer.
Add New Comment