How do I install the LUCIDE 45252 HONORE Wall Light? (LUCIDE 45252 HONORE Wall Light Instruction Manual)

Answer

manuals.plus

Feb 06, 2025 - 04:30 AM


To install the LUCIDE 45252 HONORE Wall Light, please follow these steps:

1. Before starting the installation, always isolate the power by turning off the electricity to the area where you will be installing the light fixture.

2. Ensure that the location where you plan to install the wall light is suitable. This product is designed for indoor use only and should not be installed in humid places or in direct contact with water or inflammable products.

3. Make sure to respect the minimal distance indicated on the light fixture to inflammable products.

4. It is recommended to have the installation done by a qualified electrician to ensure proper installation and safety.

5. During installation, ensure that the cables are not squeezed or damaged by sharp edges. If the external flexible cable is damaged, it should be replaced exclusively by the manufacturer, their service agent, or a qualified electrician to avoid any risks.

6. Once the installation is complete, you can connect the power supply. The LUCIDE 45252 HONORE Wall Light comes with an on/off switch located on the product itself for easy control.

Please note that this is a general guide for installation. For more specific instructions and diagrams, please refer to the installation drawing and safety instructions provided in the instruction manual. If you have any doubts or questions, it is always recommended to consult a qualified electrician for assistance.