User Manual Q&AAnswer
Feb 06, 2025 - 04:25 AM
No, you cannot directly replace your conventional T8 fluorescent tube with the Radium LED T8 Neo Tube Light. The LED T8 Neo Tube Light is not compatible with direct mains (220-240V) or electromagnetic control gear (CCG) or electric control gear (ECG). You will need to replace the CCG or ECG with a suitable constant current LED driver. This replacement should be done by a qualified electrician as it represents a modification to the luminaire. It is important to consult the manufacturer of the lamp if you have any doubts about the suitability of the application.
Additionally, please note that the LED T8 Neo Tube Light is designed for general lighting service and is suitable as a replacement for T8 fluorescent lamps with G13 bi-pin bases. It is recommended to use the lamp in dry conditions or in a luminaire that provides protection. The lamp has a maximum case temperature (Tc) of 70°C and an ambient temperature (Ta) range of -20° to 50°C. The specific operating current, wattage, and voltage requirements vary depending on the model of the LED T8 Neo Tube Light. Please refer to the provided information in the manual for the recommended LED drivers for single, two, or four tubes.
Add New Comment