User Manual Q&AAnswer
Feb 06, 2025 - 04:20 AM
To adjust the minimum and maximum dimming levels on the sg LEDDim 350 Digital Trailing Edge Dimmer, follow these steps:
1. Locate the dimmer on your wall or in your electrical panel.
2. Ensure that the dimmer is connected to a power source and turned on.
3. Press and hold the "Minimum" button on the dimmer for a few seconds until the LED indicator starts flashing.
4. While the LED indicator is flashing, use the "+" and "-" buttons to adjust the minimum dimming level to your desired setting. The LED indicator will stop flashing once the adjustment is made.
5. To adjust the maximum dimming level, press and hold the "Maximum" button on the dimmer until the LED indicator starts flashing.
6. While the LED indicator is flashing, use the "+" and "-" buttons to adjust the maximum dimming level to your desired setting. The LED indicator will stop flashing once the adjustment is made.
7. Test the dimming levels by turning the dimmer xxxx or using the remote control. The lights should now dim to the adjusted minimum and maximum levels.
Note: It is important to refer to the specific instructions provided in the manual for your sg LEDDim 350 Digital Trailing Edge Dimmer, as the steps may vary slightly depending on the model. If you encounter any difficulties or have further questions, it is recommended to contact an authorized electrician or the manufacturer's support team for assistance.
Add New Comment