Answer

Feb 06, 2025 - 03:54 AM
To install the NOVALUX 84239 1250W LED Stadium Light, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Attach the glare shield to the luminaire body using the M5x12mm screws provided. This will lock the shield in place.
2. Mounting the Luminaire:
- Place the fixture on the mounting surface.
- Insert the M20 and M10 bolts into the bracket. Tighten the bolts hand tight so that the luminaire is secured to the mounting surface but still allows adjustment. Do not fully torque down until the desired position is set.
- Adjust the bracket and fixture vertically, and for Install Method 1 horizontally.
- Fully tighten all bolts to secure the fixture.
3. For the 750W / 1250W models:
- Attach the glare shield to the luminaire body using the M5x12mm screws provided.
- Mount the luminaire following the same steps as mentioned above.
- Note: The 1250W Stadium Light uses an external driver box. The driver box should be mounted within 85 feet of the fixture to prevent voltage loss.
Please ensure that you read and understand all the warnings and general instructions provided in the manual before attempting to install the luminaire. It is important to have a qualified electrician perform the installation if you are unfamiliar with proper electrical wiring connections.
For more detailed diagrams and information, please refer to the "MOUNTING DIAGRAM" and "GENERAL WIRING DIAGRAM" sections in the manual.
If you have any further questions or concerns, it is recommended to contact the supplier, a service agent, or a qualified person for assistance.
Add New Comment