User Manual Q&AAnswer
Feb 06, 2025 - 03:46 AM
To change the configuration of the EATON FlexiTech Exit Wall 12M CGLine+, follow these steps:
1. Disconnect the battery by removing the power source.
2. Wait for 10 seconds.
3. Reconnect the battery to initiate the configuration change.
It is important to note that this process should be followed if you decide to change the configuration from "b-c" or from Even to Odd configuration. By disconnecting and reconnecting the battery, the system will reset and allow for the new configuration to take effect.
For more detailed information on the configuration options and duration test settings, please refer to the Controller CG Line+ user manual provided with the product.
Additionally, if you find that the battery duration is insufficient, it is recommended to replace the battery. Similarly, when the life of the light source is over, it is advised to replace the luminaire.
Please refer to the EATON FlexiTech Exit Wall 12M CGLine+ Instruction Manual for further instructions and guidelines on installation, maintenance, and troubleshooting.
Add New Comment