User Manual Q&AAnswer
Feb 06, 2025 - 03:41 AM
To connect the Immax NEO LITE Smart Atmosphere Lamp to the Smart Life app, you can follow the steps outlined in the manual:
1. Make sure the lamp is powered on and your mobile device is connected to the same Wi-Fi network as the lamp.
2. Download the "Smart Life" app by scanning the QR code provided in the manual or searching for "Smart Life" in the App Store or Google Play.
3. Open the "Smart Life" app and tap on "Register" to create an account using your phone number or email. Sign in to the app.
4. After signing in, make sure the LED lamp is powered on and in the quick flashing status (you can achieve this by turning the lamp on and off three times or long-pressing the switch button for over 5 seconds).
5. In the "Smart Life" app, tap on the "+" icon to add devices. If your mobile device has already turned on Bluetooth before connecting the LED lamp, the app will automatically connect to the lamp. If not, the app will prompt you to turn on Bluetooth. Choose "Allow" to enable Bluetooth on your mobile device.
6. The app will display information about the LED lamp. Choose "Go to add" to proceed.
7. You will enter an interface for Bluetooth device pairing. Tap on the "+" icon and enter your Wi-Fi password in the next interface. Choose "Confirm" to connect the lamp to your Wi-Fi network.
8. Wait for your mobile device to pair with the lamp. Once the pairing is successful, choose "Done" when it shows "Added successfully" to finish the setup.
9. You can now control and operate the Immax NEO LITE Smart Atmosphere Lamp using the Smart Life app.
Note: If the above solution does not work for your devices, please refer to solution 2 in the manual for alternative instructions on connecting the lamp to the app.
Add New Comment