User Manual Q&AAnswer
Feb 06, 2025 - 03:35 AM
To mount the VENITEM L-LS-LSP HEMA sounder on the wall, follow these steps:
1. Use 6mm plugs to fix the siren on the wall. Make sure to check if the tamper works properly.
2. Insert the connection cables through the holes located on the lower part of the sounder base.
3. If necessary, modify the default settings by adjusting the dipswitches as shown in the manual.
4. Connect the battery and power supply to the alarm control panel.
5. Close both the internal and external covers using the screws provided.
Please note that it is important to prevent air from flowing into the cable tray to avoid moisture formation inside the sounder. After connecting the sounder, seal the hole using silicon or any other filler type to prevent condensation and moisture from affecting the sounder's performance.
For more detailed instructions and illustrations, refer to the "MOUNTING" section in the VENITEM L-LS-LSP HEMA Instruction Manual.
Add New Comment