How do I install the Hidealite 320, 380 Moon Slim Bluetooth luminaire? (hidealite 320 380 Moon Slim Bluetooth Installation Guide)

Answer

manuals.plus

Feb 06, 2025 - 03:34 AM

To install the Hidealite 320, 380 Moon Slim Bluetooth luminaire, follow these steps:

1. Ensure that the power is turned off before starting the installation.
2. The luminaire should be installed by a licensed electrician and in accordance with local regulations.
3. Connect the battery for the Moon Slim Emergency light module, if applicable. When voltage is applied, the emergency light module will start a self-test.
- Flashing green light: Battery is charging/normal operation
- Permanent green light: Battery fully charged/normal operation
- Flashing red light: Battery not connected or defective. Replace battery and press and hold the test button for 10 seconds.
- Solid red light: Defective emergency light module. Replace both the emergency light module and battery.
4. For the Moon Slim Bluetooth EM 320/380 and 320/380 with EM accessories, make sure to connect the emergency light module to neutral and constant current.
5. The emergency light module performs automatic self-tests every 30 and 180 days. You can also manually perform a self-test by pressing and holding the test button for 1-5 seconds.
6. Refer to the list of recommended dimmers on the Hidealite website if you plan to use a dimmer with the luminaire.
7. For further information and symbols used, refer to the manual available at www.hidealite.se.

Please note that these instructions are a general guide. It is always recommended to refer to the specific installation guide provided with the product for accurate and detailed instructions.