User Manual Q&AAnswer
Feb 06, 2025 - 03:23 AM
To connect the STM17R Integrated Steppers to a DC power source, follow these steps:
1. Make sure you have a DC power source with a voltage range of 12-48VDC.
2. Connect the red wire from the stepper drive to the positive output terminal on the power supply, typically marked V+.
3. Connect the black wire from the stepper drive to the negative terminal on the power supply, typically marked V-.
4. Do not apply power until all connections to the drive have been made.
For more detailed information and diagrams, please refer to the STM17R Hardware Manual available at www.applied-motion.com/support/manuals.
Add New Comment