How do I install the smappee Smart EV Wall Charging with Solar and Off Peak? (smappee Smart EV Wall Charging Off Peak User Guide)

Answer

manuals.plus

Feb 06, 2025 - 03:15 AM

To install the , follow these steps:

1. Prepare the installation: Make sure you have a power supply and communication cable between the EV Wall and the distribution panel.

2. Fix the mounting plate: Attach the provided plugs and screws to fix the mounting plate to the wall.

3. Attach the EV Wall housing: Use the provided small screws to attach the EV Wall housing to the mounting plate.

4. Connect the cables: Connect the power supply cable, communication cable, and charging cable (if applicable) to the EV Wall. Refer to the diagrams in the manual for guidance. If you have a 3-phase delta solar installation (3*230 V), consult the full manual online for specific instructions.

5. Connect the EV Wall modules: Install the Connect, EV Wall splitter, CT Hub, and Current Transformers (CTs) inside the distribution panel. These components communicate with the charging station using a CAT 5/6 communication cable.

6. Connect the cables to the cover's PCB: Connect the A and B cables and the communication cable to the cover's PCB. Then attach the front cover to the EV Wall to close it. Switch on the power using the circuit breaker.

7. Download the Smappee App: Download the Smappee App and follow the instructions to configure your Smappee charging station.

8. Validate the installation: Once Smappee Connect shows a green pulsing light, verify that the real-time bubbles in the Smappee App/Dashboard show correctly measured values.

9. Create a user account: Create a user account for the customer and share the location with this new username. Write down the username, password, and email address in the Quick Starter Guide (included in the box) and hand it to your customer. This user account can be used for the Smappee App and Dashboard and to set smart charging schedules.

Please note that electrical work should be conducted according to national safety standards and by a certified electrician. For further safety instructions and more detailed information, consult the full manual available at smappee.com/smappee-manuals or via the provided QR code.