User Manual Q&AAnswer
Feb 06, 2025 - 02:31 AM
To adjust the motion sensor settings on the Hidealite 20688917 Moon Slim S 255 IP44 2300lm, follow these steps:
1. Range: The range refers to the area the sensor covers. To adjust the range, locate the DIP switch on the sensor and set it according to your desired range.
2. Hold Time: The hold time is the duration the unit remains lit after a person leaves the sensor's range. To adjust the hold time, locate the DIP switch on the sensor and set it to the desired time (5s, 1min, 3min, or 10min).
3. Daylight Sensor: The daylight sensor determines the activation of the sensor based on the ambient light level. To set the daylight sensor, locate the DIP switch on the sensor and choose one of the following options:
- Disable: The sensor is always active, even in daylight.
- 30Lux: The sensor is active when it is half dark.
Please note that these settings may vary depending on your specific model. Refer to the product manual for the exact location and configuration of the DIP switches.
Remember to always turn off the power before making any adjustments or performing maintenance on the luminaire. If you are unsure or uncomfortable with the installation or adjustment process, it is recommended to seek assistance from a licensed electrician.
Add New Comment