User Manual Q&AAnswer
Feb 06, 2025 - 02:17 AM
To attach the BEMM 5833 Kitchen Roll Holder to the wall, you have two options: using the self-adhesive strip or screws. Here are the steps for each method:
1. Self-adhesive strip:
- Clean and dry the surface where you want to attach the kitchen roll holder.
- Remove the foil from the adhesive surface of the strip.
- Press the paper towel holder against the cleaned and dried surface, holding it for 30 seconds.
- Wait for 24 hours to allow the adhesive strip to properly stick.
2. Screws:
- Clean and dry the surface where you want to attach the kitchen roll holder.
- Drill holes in the wall at the desired location, ensuring the drill is held straight in front of the screws.
- Attach the xxxx rings to the screws.
- Press the fixing plate of the kitchen roll holder against the wall, aligning it with the drilled holes.
- Tighten the screws into the wall, using the xxxx rings to secure them.
- Make sure not to overtighten the screws to prevent damage to the substrate.
Please note that for both methods, the surface should be smooth and straight for optimal adhesion. Additionally, always keep the set of screws and adhesive strip away from children, and avoid pressing directly on the holder itself when attaching or using the product.
Add New Comment