User Manual Q&AAnswer
Feb 06, 2025 - 02:16 AM
To connect your laptop to the LINDY DST-Mx USB 3.2 Laptop Docking Station, follow these steps:
1. Plug the USB Type C connector of the USB 3.2 Type C Mini Dock into your computer's USB Type C port.
2. Download the software driver for the docking station from the Lindy webshop. The driver can be found under the corresponding No. 43360. Install the driver on your computer.
3. Connect your display(s) to the HDMI port(s) on the Mini Dock using appropriate HDMI cables.
4. Use a standard RJ45 Ethernet cable to connect the Dock to your network for Ethernet connectivity.
5. Connect up to two USB devices to the Docking Station using USB Type A cables. Both USB Type A ports support BC 1.2 standard for faster charging of mobile devices.
6. If you want to use the USB Type C port for Power Delivery and data, you can either connect your laptop's or Macbook's USB Type C power supply to power/charge the laptop or connect a USB Type C device.
7. For audio connectivity, connect your microphone, headphone, or speaker to the Mini Dock using a 3.5mm audio cable.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment