User Manual Q&AAnswer
Feb 06, 2025 - 02:13 AM
To install the QAZQA Fimm Fan, follow these steps:
1. Insert the down rod over the upper canopy and secure it with the cross pin and cotter pin using the provided screws.
2. Install the mounting bracket using screws.
3. Loosen the xxxx from the motor.
4. Install the blades on the motor using screws.
5. Make sure the fan is disconnected from the electrical supply and carefully insert it into the mounting bracket. Rotate the fan until the notch of the hanger ball engages the pin of the mounting bracket. Then, firmly fix the screws.
6. Assemble the LED light plate to the light kit fixing bracket using screws and connect the LED light kit to the receiver using the male and female plug. Insert the remote control receiver on the mounting bracket. Connect the motor wires, LED light wires, and receiver's power wires to the receiver using the male and female plug. Also, connect the ground wire using the male and female plug. Then, connect the power supply to the fan.
7. Assemble the shade to the light plate and assemble the upper canopy to the mounting bracket. Rotate clockwise when assembling the canopy.
8. The fan installation is now complete.
Please refer to the instruction manual for detailed diagrams and illustrations of the installation process.
Add New Comment