How do I install the Westinghouse 62278 Wall Light Fixture? (Westinghouse 62278 Wall Light Fixture Instruction Manual)

Answer

manuals.plus

Feb 06, 2025 - 02:12 AM


To install the Westinghouse 62278 Wall Light Fixture, please follow these steps:

1. Turn off the power at the circuit box to avoid electric shock.
2. Place the mounting bar (B) flush against the wall at the desired mounting location. Use the outside mounting bar holes as a guide and mark where pilot holes are to be drilled.
3. Inset two plastic anchors (G) into the pilot holes (for drywall).
4. Align the outside mounting bar holes with the plastic anchors (G) and secure the mounting bar (B) into place using wood screws (E).
5. Make an electrical connection by loosening the terminal screws on the terminal block (M) and inserting the live, neutral, and ground terminals.
6. Tighten the terminal screws and ensure there are no stray wires.
7. Position the back plate (C) over the mounting screws (A) by aligning the back plate openings (F) with the mounting screws (A).
8. Secure the back plate with cap nuts (H).
9. Install the glass shade (L) and plate (P) into the holder(s) (N) and secure them with thumb screws or rings (O), whichever is applicable.
10. Install the lamp (not supplied) and ensure not to exceed the maximum capacity recommended on the socket.
11. Turn the power back on at the circuit box.

Please note that these instructions are a summary and it is important to read and follow the complete instructions provided in the Westinghouse 62278 Wall Light Fixture Instruction Manual for proper installation and safety precautions.