How do I assemble the axi ACTIVITY Table with 3 Bins? (axi ACTIVITY Table 3 Bins Instruction Manual)

Answer

manuals.plus

Feb 06, 2025 - 01:21 AM

To assemble the axi ACTIVITY Table with 3 Bins, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

1. Start by ensuring that all the parts mentioned in the "PARTS" section of the manual are included in the package.

2. Carefully read and understand the assembly instructions provided in the manual before beginning the assembly process.

3. Assemble the table according to the given instructions. Make sure to follow the sequence of steps mentioned in the manual.

4. Pay attention to any potential hazards mentioned in the "NOTICE" and "WARNING" sections of the manual. Take necessary precautions to ensure safety during the assembly process.

5. Once the table is assembled, check all the nuts and bolts to ensure they are properly tightened. Look for any sharp edges or splinters and replace any parts if necessary.

6. The manual recommends regular maintenance of the table. Check for loose screws, tightness of joints, and fastenings regularly, especially during the outdoor play season. Tighten nuts and bolts if needed.

7. Once a year, check the state of the protective stain layer on the wood. If required, apply a new coat of water-based paint/stain based on natural components to ensure optimum durability.

8. The axi ACTIVITY Table with 3 Bins comes with a warranty. If you encounter any issues with the product, such as damage or problems, contact your dealer or the point of sale where you purchased the product.

Please note that the above instructions are a general guide. It is important to refer to the specific instructions provided in the instruction manual for accurate assembly and maintenance of the axi ACTIVITY Table with 3 Bins.