User Manual Q&AAnswer
Feb 06, 2025 - 01:06 AM
To wire the drive to the AC power source, follow these steps:
1. Make sure the power is not applied until step 4 is completed and the programming cable is connected.
2. The STAC6x drives accept 94-135VAC, while the STAC6x-220 drives accept 94-265VAC.
3. If using an external fuse, it is recommended to use the following fast-acting fuses:
- STAC6x: 6 amp
- STAC6x-220: 5 amp
Please refer to the STAC6 Hardware Manual for more detailed information on wiring the drive to the AC power source.
Note: It is important to read and understand the manual thoroughly before attempting any installation or wiring procedures to ensure proper and safe operation of the product.
Add New Comment