User Manual Q&AAnswer
Feb 06, 2025 - 12:09 AM
To mount a VESA compliant monitor on the Kanto DTS1000 Desktop Monitor Stand, please follow the steps outlined in the user manual:
1. Mount VESA Plate: Attach the VESA plate to the back of your monitor using the provided screws. Make sure to align the holes on the plate with the VESA mounting holes on your monitor.
2. Assemble Base: Assemble the base of the monitor stand according to the instructions provided. This usually involves attaching the vertical pole to the base using the included hardware.
3. Attach Cable Management Clip: Secure the cable management clip to the back of the vertical pole using the provided screws. This will help keep your cables organized and out of the way.
4. Hang Monitor: Hang the monitor onto the VESA plate by aligning the mounting holes on the plate with the corresponding holes on the back of the monitor. Make sure the monitor is securely attached to the plate.
5. Secure Monitor: Use the included screws to fasten the monitor to the VESA plate. Make sure the screws are tightened securely, but be careful not to overtighten and damage the monitor.
6. Adjust Monitor: Adjust the position of the monitor to your desired height and angle. The monitor stand may have adjustable features such as tilt, swivel, and height adjustment. Refer to the user manual for specific instructions on adjusting these settings.
7. Raise Monitor: If needed, raise the monitor to a comfortable viewing height by adjusting the height of the vertical pole. Ensure that the monitor is stable and securely held in place.
8. Manage Cables: Use the cable management clip to route and secure the cables connected to your monitor. This will help keep your workspace tidy and prevent cables from getting tangled.
Please note that these instructions are a general guide. For detailed and specific instructions, it is recommended to refer to the user manual provided with the Kanto DTS1000 Desktop Monitor Stand.
Add New Comment